CASIC HW-600 series UAV



















UAVs
Role

UAV

National origin

China
Manufacturer

CASIC
Designer

CASIC
First flight
early 2010s
Introduction
early 2010s
Status
In service
Primary user

China

CASIC HW-600 series UAVs are Chinese UAVs developed by 3rd Academy Hiwing (or HW for short, 海鹰in Chinese) of China Aerospace Science and Industry Corporation (CASIC), and this academy is also more commonly known as HiWING Mechanical and Electrical Technology Corp, (海鹰机电技术研究院, the exact literal translation of its Chinese name is actually Sea Eagle Mechanical and Electrical Technology Research Academy) or HiWING for short.




Contents





  • 1 HW-600 Sky Hawk (WJ-600)


  • 2 HW-610


  • 3 See also


  • 4 References




HW-600 Sky Hawk (WJ-600)


HW-600 Sky Hawk (Tian-Yi or Tianying, 天鹰), this HiWING developed UAV is a jet-powered UCAV. The turbojet powered HW-600 Sky Hawk has a conventional layout with high-wing configuration and small winglets. The engine is in the aft section of the cylindrical fuselage, and the inlet is atop of the fuselage at the root of the single vertical tail fin. There is a single hardpoint under each wing, which is designed to carry a variety of Chinese UAV employed missiles and other munitions. Sensors are presumably stored in the bulbous nose. Also known as WJ-600, there are Chinese internet claims that HW-600 is the designation for the unarmed reconnaissance version, while WJ-600 is the designation for the armed UCAV version. However, such unconfirmed claims have yet to be verified by official governmental / industrial / independent sources. Reportedly, WJ is short for Wu-Jian (无歼), short for Wu-Ren Jian-Ji-Ji (无人歼击机), meaning unmanned fighter because MANPADs can be deployed by this UCAV as air-to-air missiles. Specification:[1][2]


  • Speed: 200 m/s

  • Ceiling: 10 km

  • Operational range: 2100 km

  • Launch: rocket

  • Recovery: parachute

  • Payload: 130 kg

  • Endurance: 3 - 5 hr


HW-610


CASIC HW-610 is an UCAV powered by jet. In addition to carrying out traditional reconnaissance missions, the UAV can also be armed to perform ground attack mission. HW-610 is a development of the unarmed version of earlier HW(WJ)-600 and shares the similar design layout. There are two hardpoints with one under each wing to carry missiles for land attack missions. Specification:[3]


  • Length (m): 6.5

  • Wingspan (mm): 6.8

  • Take-off weight (t): 1

  • Payload (kg): 130

  • Endurance (hr): 3 – 5

  • Speed (km/hr): 500 – 700

  • Remote control radius (km): 350

  • Max wind scale allowed for operation: 8 – 9

  • Launch: Rocket assisted take-off

  • Recovery: parachute


See also


  • List of unmanned aerial vehicles of China


References




  1. ^ HW-600 Sky Hawk (WJ-600)


  2. ^ HW-600/WJ-600


  3. ^ "HW-610". Retrieved 2015. Check date values in: |accessdate= (help).mw-parser-output cite.citationfont-style:inherit.mw-parser-output qquotes:"""""""'""'".mw-parser-output code.cs1-codecolor:inherit;background:inherit;border:inherit;padding:inherit.mw-parser-output .cs1-lock-free abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-limited a,.mw-parser-output .cs1-lock-registration abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-subscription abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registrationcolor:#555.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration spanborder-bottom:1px dotted;cursor:help.mw-parser-output .cs1-hidden-errordisplay:none;font-size:100%.mw-parser-output .cs1-visible-errorfont-size:100%.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-formatfont-size:95%.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-leftpadding-left:0.2em.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-rightpadding-right:0.2em







-

這個網誌中的熱門文章

How to read a connectionString WITH PROVIDER in .NET Core?

圖片
6 I added .AddJsonFile("Connections.json", optional: true, reloadOnChange: true) in public Startup(IHostingEnvironment env) Connections.json contains: "ConnectionStrings": "DefaultConnection": "Server=(localdb)\mssqllocaldb;Database=DATABASE;Trusted_Connection=True;MultipleActiveResultSets=true", "COR-W81-101": "Data Source=DATASOURCE;Initial Catalog=P61_CAFM_Basic;User Id=USERID;Password=PASSWORD;Persist Security Info=False;MultipleActiveResultSets=False;Packet Size=4096;", "COR-W81-100": "Data Source=DATASOURCE;Initial Catalog=Post_PS;User Id=USERID;Password=PASSWORD;Persist Security Info=False;MultipleActiveResultSets=False;Packet Size=4096;", "MSEDGEWIN10": "Data Source=DATASOURCE; Initial Catalog=COR_Basic; Persist Security Info=False;Integrated Security=true;MultipleActiveResultSets=False;Packet Size=4096;Application Name="COR_Basic"", "server&qu
閱讀完整內容

In R, how to develop a multiplot heatmap.2 figure showing key labels successfully

圖片
1 2 I'm trying to develop a multiplot heatmap.2 saved to a pdf. I'm having some success but the axis labels are getting chopped off. Subplot titles are also desirable but again the labels are getting chopped. Here's my reproducible code: library(gridExtra) library(grid) library(gridGraphics) library(gplots) Col = colorRampPalette(c("red","orange","yellow", "white")) grab_grob <- function() grid.echo() grid.grab() par(cex.main=0.1, mar = c(1,1,1,1) ) #data<-read.table("heatmap.input.matrix.data.txt") lmat = rbind(c(2,3),c(4,1),c(4,1)) lwid = c(2.5,4) lhei = c(0.5,4,3) labRowvec <- c(rep(NULL, dim(matrix(runif(1000, 1,10),ncol=50))[1])) labColvec <- c(rep(NULL, dim(matrix(runif(1000, 1,10),ncol=50))[2])) gl <- lapply(1:12, function(i) heatmap.2(matrix(runif(1000, 1,10),ncol=50), dendrogram = "none",offsetRow=-0.5, offsetCol=-1,srtCol=0, density="density", lmat =lmat,lhei = l
閱讀完整內容

Museum of Modern and Contemporary Art of Trento and Rovereto

圖片
Art museum in Rovereto TN, Italy Museum of Modern and Contemporary Art of Trento and Rovereto Museo d'arte moderna e contemporanea di Trento e Rovereto MART, Entrance Location Corso Angelo Bettini, 43, 38068 Rovereto TN, Italy Coordinates 45°53′38″N 11°02′42″E  /  45.8940°N 11.0450°E  / 45.8940; 11.0450 Coordinates: 45°53′38″N 11°02′42″E  /  45.8940°N 11.0450°E  / 45.8940; 11.0450 Type Art museum Director Gianfranco Maraniello Public transit access Trento train station. Taxis outside station. Website mart.trento.it The Museum of Modern and Contemporary Art of Trento and Rovereto (MART) ( Museo d'Arte Moderna e Contemporanea di Trento e Rovereto , in Italian) is a museum centre in the Italian province of Trento. The main site is in Rovereto, and contains mostly modern and contemporary artworks, including works from renowned Giorgio Morandi, Giorgio de Chirico, Felice Casorati, Carlo Carrà and Fortunato Depero. Fortunato Depero's house in Rovereto (known as Casa d
閱讀完整內容