Odtnhj

The 3-adic integers, with selected corresponding characters on their Pontryagin dual group

In mathematics, the p-adic number system for any prime number p extends the ordinary arithmetic of the rational numbers in a different way from the extension of the rational number system to the real and complex number systems. The extension is achieved by an alternative interpretation of the concept of "closeness" or absolute value. In particular, p-adic numbers are considered to be close when their difference is divisible by a high power of p: the higher the power, the closer they are. This property enables p-adic numbers to encode congruence information in a way that turns out to have powerful applications in number theory – including, for example, in the famous proof of Fermat's Last Theorem by Andrew Wiles.^[1]

p-adic numbers were first described by Kurt Hensel in 1897,^[2] though, with hindsight, some of Ernst Kummer's earlier work can be interpreted as implicitly using p-adic numbers.^{[note 1]} The p-adic numbers were motivated primarily by an attempt to bring the ideas and techniques of power series methods into number theory. Their influence now extends far beyond this. For example, the field of p-adic analysis essentially provides an alternative form of calculus.

More formally, for a given prime p, the field Q_p of p-adic numbers is a completion of the rational numbers. The field Q_p is also given a topology derived from a metric, which is itself derived from the p-adic order, an alternative valuation on the rational numbers. This metric space is complete in the sense that every Cauchy sequence converges to a point in Q_p. This is what allows the development of calculus on Q_p, and it is the interaction of this analytic and algebraic structure that gives the p-adic number systems their power and utility.

The p in "p-adic" is a variable and may be replaced with a prime (yielding, for instance, "the 2-adic numbers") or another placeholder variable (for expressions such as "the ℓ-adic numbers"). The "adic" of "p-adic" comes from the ending found in words such as dyadic or triadic.

Introduction

This section is an informal introduction to p-adic numbers, using examples from the ring of 10-adic (decadic) numbers. Although for p-adic numbers p should be a prime, base 10 was chosen to highlight the analogy with decimals. The decadic numbers are generally not used in mathematics: since 10 is not prime or prime power, the decadics are not a field. More formal constructions and properties are given below.

In the standard decimal representation, almost all^{[note 2]}real numbers do not have a terminating decimal representation. For example, 1/3 is represented as a non-terminating decimal as follows

13=0.333333….displaystyle frac 13=0.333333ldots .

Informally, non-terminating decimals are easily understood, because it is clear that a real number can be approximated to any required degree of precision by a terminating decimal. If two decimal expansions differ only after the 10th decimal place, they are quite close to one another; and if they differ only after the 20th decimal place, they are even closer.

10-adic numbers use a similar non-terminating expansion, but with a different concept of "closeness". Whereas two decimal expansions are close to one another if their difference is a large negative power of 10, two 10-adic expansions are close if their difference is a large positive power of 10. Thus 4739 and 5739, which differ by 10³, are close in the 10-adic world, and 72694473 and 82694473 are even closer, differing by 10⁷.

More precisely, a positive rational number r can be uniquely expressed as r =: p/q·10^d, where p, q and 10 are positive integers and are all relatively prime with respect to each other. Let the 10-adic "absolute value"^{[note 3]} of r be

|r|10:=110d_10:=frac 110^d .

Additionaly, we define

|0|10:=00 .

Now, taking p/q = 1 and d = 0,1,2,... we have

|10⁰|₁₀ = 10⁰, |10¹|₁₀ = 10⁻¹, |10²|₁₀ = 10⁻², ...,

with the consequence that we have

limd→+∞|10d|10=010^d .

Closeness in any number system is defined by a metric. Using the 10-adic metric the distance between numbers x and y is given by |x − y|₁₀. An interesting consequence of the 10-adic metric (or of a p-adic metric) is that there is no longer a need for the negative sign. (In fact, there is no order relation which is compatible with the ring operations and this metric, s. b.) As an example, by examining the following sequence we can see how unsigned 10-adics can get progressively closer and closer to the number −1:

9=−1+10displaystyle 9=-1+10        so  |9−(−1)|10=1109-(-1).

99=−1+102displaystyle 99=-1+10^2       so  |99−(−1)|10=1100_10=frac 1100.

999=−1+103displaystyle 999=-1+10^3       so  |999−(−1)|10=11000_10=frac 11000.

9999=−1+104displaystyle 9999=-1+10^4       so  |9999−(−1)|10=110000_10=frac 110000.

and taking this sequence to its limit, we can deduce the 10-adic expansion of −1

|…9999−(−1)|10=0displaystyle  ,

thus

…9999=−1displaystyle dots 9999=-1 ,

an expansion which clearly is a ten's complement representation.

In this notation, 10-adic expansions can be extended indefinitely to the left, in contrast to decimal expansions, which can be extended indefinitely to the right. Note that this is not the only way to write p-adic numbers – for alternatives see the Notation section below.

More formally, a 10-adic number can be defined as

∑i=n∞ai10idisplaystyle sum _i=n^infty a_i10^i

where each of the a_i is a digit taken from the set 0, 1, … , 9 and the initial index n may be positive, negative or 0, but must be finite. From this definition, it is clear that positive integers and positive rational numbers with terminating decimal expansions will have terminating 10-adic expansions that are identical to their decimal expansions. Other numbers may have non-terminating 10-adic expansions.

It is possible to define addition, subtraction, and multiplication on 10-adic numbers in a consistent way, so that the 10-adic numbers form a commutative ring.

We can create 10-adic expansions for "negative numbers"^{[note 4]} as follows

−100=−1×100=…9999×100=…9900displaystyle -100=-1times 100=dots 9999times 100=dots 9900

⇒−35=−100+65=…9900+65=…9965displaystyle Rightarrow -35=-100+65=dots 9900+65=dots 9965

⇒−(3+12)=−3510=…996510=…9996.5displaystyle Rightarrow -left(3+dfrac 12right)=dfrac -3510=dfrac dots 996510=dots 9996.5

and fractions which have non-terminating decimal expansions also have non-terminating 10-adic expansions. For example

106−17=142857;1012−17=142857142857;1018−17=142857142857142857displaystyle dfrac 10^6-17=142857;qquad dfrac 10^12-17=142857142857;qquad dfrac 10^18-17=142857142857142857

⇒−17=…142857142857142857displaystyle Rightarrow -dfrac 17=dots 142857142857142857

⇒−67=…142857142857142857×6=…857142857142857142displaystyle Rightarrow -dfrac 67=dots 142857142857142857times 6=dots 857142857142857142

⇒17=−67+1=…857142857142857143.displaystyle Rightarrow dfrac 17=-dfrac 67+1=dots 857142857142857143.

Generalizing the last example, we can find a 10-adic expansion with no digits to the right of the decimal point for any rational number p/q such that q is co-prime to 10; Euler's theorem guarantees that if q is co-prime to 10, then there is an n such that 10ⁿ − 1 is a multiple of q. The other rational numbers can be expressed as 10-adic numbers with some digits after the decimal point.

As noted above, 10-adic numbers have a major drawback. It is possible to find pairs of non-zero 10-adic numbers (which are not rational, thus having an infinite number of digits) whose product is 0.^{[3][note 5]} This means that 10-adic numbers do not always have multiplicative inverses i.e. valid reciprocals, which in turn implies that though 10-adic numbers form a ring they do not form a field, a deficiency that makes them much less useful as an analytical tool. Another way of saying this is that the ring of 10-adic numbers is not an integral domain because they contain zero divisors.^{[note 5]} The reason for this property turns out to be that 10 is a composite number which is not a power of a prime. This problem is simply avoided by using a prime number p or a prime power pⁿ as the base of the number system instead of 10 and indeed for this reason p in p-adic is usually taken to be prime.

fraction	original decimal notation	10-adic notation	fraction	original decimal notation	10-adic notation	fraction	original decimal notation	10-adic notation
12displaystyle frac 12	0.5	0.5	57displaystyle frac 57	0.714285	4285715	910displaystyle frac 910	0.9	0.9
13displaystyle frac 13	0.3	67	67displaystyle frac 67	0.857142	7142858	111displaystyle frac 111	0.09	091
23displaystyle frac 23	0.6	34	18displaystyle frac 18	0.125	0.125	211displaystyle frac 211	0.18	182
14displaystyle frac 14	0.25	0.25	38displaystyle frac 38	0.375	0.375	311displaystyle frac 311	0.27	273
34displaystyle frac 34	0.75	0.75	58displaystyle frac 58	0.625	0.625	411displaystyle frac 411	0.36	364
15displaystyle frac 15	0.2	0.2	78displaystyle frac 78	0.875	0.875	511displaystyle frac 511	0.45	455
25displaystyle frac 25	0.4	0.4	19displaystyle frac 19	0.1	89	611displaystyle frac 611	0.54	546
35displaystyle frac 35	0.6	0.6	29displaystyle frac 29	0.2	78	711displaystyle frac 711	0.63	637
45displaystyle frac 45	0.8	0.8	49displaystyle frac 49	0.4	56	811displaystyle frac 811	0.72	728
16displaystyle frac 16	0.16	3.5	59displaystyle frac 59	0.5	45	911displaystyle frac 911	0.81	819
56displaystyle frac 56	0.83	67.5	79displaystyle frac 79	0.7	23	1011displaystyle frac 1011	0.90	0910
17displaystyle frac 17	0.142857	2857143	89displaystyle frac 89	0.8	12	112displaystyle frac 112	0.083	6.75
27displaystyle frac 27	0.285714	5714286	110displaystyle frac 110	0.1	0.1	512displaystyle frac 512	0.416	3.75
37displaystyle frac 37	0.428571	8571429	310displaystyle frac 310	0.3	0.3	712displaystyle frac 712	0.583	67.25
47displaystyle frac 47	0.571428	1428572	710displaystyle frac 710	0.7	0.7	1112displaystyle frac 1112	0.916	34.25

p-adic expansions

When dealing with natural numbers, if we take p to be a fixed prime number, then any positive integer can be written as a base p expansion in the form

∑i=0naipidisplaystyle sum _i=0^na_ip^i

where the a_i are integers in 0, … , p − 1.^[4] For example, the binary expansion of 35 is 1·2⁵ + 0·2⁴ + 0·2³ + 0·2² + 1·2¹ + 1·2⁰, often written in the shorthand notation 100011₂.

The familiar approach to extending this description to the larger domain of the rationals^[5][6] (and, ultimately, to the reals) is to use sums of the form:

±∑i=−∞naipi.displaystyle pm sum _i=-infty ^na_ip^i.

A definite meaning is given to these sums based on Cauchy sequences, using the absolute value as metric. Thus, for example, 1/3 can be expressed in base 5 as the limit of the sequence 0.1313131313...₅. In this formulation, the integers are precisely those numbers for which a_i = 0 for all i < 0.

With p-adic numbers, on the other hand, we choose to extend the base p expansions in a different way. Unlike traditional integers, where the magnitude is determined by how far they are from zero, the "size" of p-adic numbers is determined by the p-adic absolute value, where high positive powers of p are relatively small compared to high negative powers of p. Consider infinite sums of the form:

∑i=k∞aipidisplaystyle sum _i=k^infty a_ip^i

where k is some (not necessarily positive) integer, and each coefficient aidisplaystyle a_i can be called a p-adic digit.^[7] With this approach we obtain the p-adic expansions of the p-adic numbers. Those p-adic numbers for which a_i = 0 for all i < 0 are also called the p-adic integers.

As opposed to real number expansions which extend to the right as sums of ever smaller, increasingly negative powers of the base p, p-adic numbers may expand to the left forever, a property that can often be true for the p-adic integers. For example, consider the p-adic expansion of 1/3 in base 5. It can be shown to be …1313132₅, i.e., the limit of the sequence 2₅, 32₅, 132₅, 3132₅, 13132₅, 313132₅, 1313132₅, … :

52−13=4453=135;54−13=444453=13135displaystyle dfrac 5^2-13=dfrac 44_53=13_5;,dfrac 5^4-13=dfrac 4444_53=1313_5dfrac5^4-13="dfrac4444_53 = 1313_5"/>

⇒−13=…13135displaystyle Rightarrow -dfrac 13=dots 1313_5

⇒−23=…13135×2=…31315displaystyle Rightarrow -dfrac 23=dots 1313_5times 2=dots 3131_5

⇒13=−23+1=…31325.displaystyle Rightarrow dfrac 13=-dfrac 23+1=dots 3132_5.

Multiplying this infinite sum by 3 in base 5 gives …0000001₅. As there are no negative powers of 5 in this expansion of 1/3 (i.e. no numbers to the right of the decimal point), we see that 1/3 satisfies the definition of being a p-adic integer in base 5.

More formally, the p-adic expansions can be used to define the field Q_p of p-adic numbers while the p-adic integers form a subring of Q_p, denoted Z_p. (Not to be confused with the ring of integers modulo p which is also sometimes written Z_p. To avoid ambiguity, Z/pZ or Z/(p) are often used to represent the integers modulo p.)

While it is possible to use the approach above to define p-adic numbers and explore their properties, just as in the case of real numbers other approaches are generally preferred. Hence we want to define a notion of infinite sum which makes these expressions meaningful, and this is most easily accomplished by the introduction of the p-adic metric. Two different but equivalent solutions to this problem are presented in the Constructions section below.

Notation

There are several different conventions for writing p-adic expansions. So far this article has used a notation for p-adic expansions in which powers of p increase from right to left. With this right-to-left notation the 3-adic expansion of ​¹⁄₅, for example, is written as

15=…1210121023.displaystyle dfrac 15=dots 121012102_3.

When performing arithmetic in this notation, digits are carried to the left. It is also possible to write p-adic expansions so that the powers of p increase from left to right, and digits are carried to the right. With this left-to-right notation the 3-adic expansion of ​¹⁄₅ is

15=2.01210121…3 or 115=20.1210121…3.displaystyle dfrac 15=2.01210121dots _3mbox or dfrac 115=20.1210121dots _3.

p-adic expansions may be written with other sets of digits instead of 0, 1, …, p − 1. For example, the 3-adic expansion of ¹/₅ can be written using balanced ternary digits 1,0,1 as

15=…1_1111_1111_111_3.displaystyle dfrac 15=dots underline 111underline 1111underline 1111underline 1_3.

In fact any set of p integers which are in distinct residue classes modulo p may be used as p-adic digits. In number theory, Teichmüller representatives are sometimes used as digits.^[8]

Constructions

Analytic approach

Similar picture for p = 3 (click to enlarge) shows three closed balls of radius 1/3, where each consists of 3 balls of radius 1/9

The real numbers can be defined as equivalence classes of Cauchy sequences of rational numbers; this allows us to, for example, write 1 as 1.000… = 0.999… . The definition of a Cauchy sequence relies on the metric chosen, though, so if we choose a different one, we can construct numbers other than the real numbers. The usual metric which yields the real numbers is called the Euclidean metric.

For a given prime p, we define the p-adic absolute value in Q as follows:
for any non-zero rational number x, there is a unique integer n allowing us to write x = pⁿ(a/b), where neither of the integers a and b is divisible by p. Unless the numerator or denominator of x in lowest terms contains p as a factor, n will be 0. Now define |x|_p = p⁻ⁿ. We also define |0|_p = 0.

For example with x = 63/550 = 2⁻¹·3²·5⁻²·7·11⁻¹

|x|2=2|x|3=1/9|x|5=25|x|7=1/7|x|11=11|x|any other prime=1.displaystyle _7=1/7\[6pt]&

This definition of |x|_p has the effect that high powers of p become "small".
By the fundamental theorem of arithmetic, for a given non-zero rational number x there is a unique finite set of distinct primes p1,…,prdisplaystyle p_1,ldots ,p_r and a corresponding sequence of non-zero integers a1,…,ardisplaystyle a_1,ldots ,a_r such that:

|x|=p1a1…prar.=p_1^a_1ldots p_r^a_r.

It then follows that |x|pi=pi−aix for all 1≤i≤rdisplaystyle 1leq ileq r, and |x|p=1displaystyle for any other prime p∉p1,…,pr.displaystyle pnotin p_1,ldots ,p_r.

The p-adic absolute value defines a metric d_p on Q by setting

dp(x,y)=|x−y|pdisplaystyle d_p(x,y)=

The field Q_p of p-adic numbers can then be defined as the completion of the metric space (Q, d_p); its elements are equivalence classes of Cauchy sequences, where two sequences are called equivalent if their difference converges to zero. In this way, we obtain a complete metric space which is also a field and contains Q.

It can be shown that in Q_p, every element x may be written in a unique way as

∑i=k∞aipidisplaystyle sum _i=k^infty a_ip^i

where k is some integer such that a_k ≠ 0 and each a_i is in 0, …, p − 1 . This series converges to x with respect to the metric d_p.

With this absolute value, the field Q_p is a local field.

Ostrowski's theorem states that each absolute value on Q is equivalent either to the Euclidean absolute value, the trivial absolute value, or to one of the p-adic absolute values for some prime p. Each absolute value (or metric) leads to a different completion of Q. (With the trivial absolute value, Q is already complete.)

Algebraic approach

In the algebraic approach, we first define the ring of p-adic integers, and then construct the field of fractions of this ring to get the field of p-adic numbers.

We start with the inverse limit of the rings
Z/pⁿZ (see modular arithmetic): a p-adic integer m is then a sequence
(a_n)_n≥1 such that a_n is in
Z/pⁿZ, and if n ≤ m, then
a_n ≡ a_m (mod pⁿ).

Every natural number m defines such a sequence (a_n) by a_n = m mod pⁿ and can therefore be regarded as a p-adic integer. For example, in this case 35 as a 2-adic integer would be written as the sequence (1, 3, 3, 3, 3, 35, 35, 35, …).

The operators of the ring amount to pointwise addition and multiplication of such sequences. This is well defined because addition and multiplication commute with the "mod" operator; see modular arithmetic.

Moreover, every sequence (a_n) where the first element is not 0 has an inverse. In that case, for every n, a_n and p are coprime, and so a_n and pⁿ are relatively prime. Therefore, each a_n has an inverse mod pⁿ, and the sequence of these inverses, (b_n), is the sought inverse of (a_n). For example, consider the p-adic integer corresponding to the natural number 7; as a 2-adic number, it would be written (1, 3, 7, 7, 7, 7, 7, ...). This object's inverse would be written as an ever-increasing sequence that begins (1, 3, 7, 7, 23, 55, 55, 183, 439, 439, 1463 ...). Naturally, this 2-adic integer has no corresponding natural number.

Every such sequence can alternatively be written as a series. For instance, in the 3-adics, the sequence (2, 8, 8, 35, 35, ...) can be written as 2 + 2·3 + 0·3² + 1·3³ + 0·3⁴ + ... The partial sums of this latter series are the elements of the given sequence.

The ring of p-adic integers has no zero divisors, so we can take the field of fractions to get the field Q_p of p-adic numbers. Note that in this field of fractions, every non-integer p-adic number can be uniquely written as p⁻ⁿ u with a natural number n and a unit u in the p-adic integers. This means that

Qp=Quot⁡(Zp)≅(pN)−1Zp×.displaystyle mathbf Q _p=operatorname Quot left(mathbf Z _pright)cong (p^mathbf N )^-1mathbf Z _p^times .

Note that S⁻¹ A, where S=pN=pn:n∈Ndisplaystyle S=p^mathbf N =p^n:nin mathbf N is a multiplicative subset (contains the unit and closed under multiplication) of a commutative ring with unit Adisplaystyle A, is an algebraic construction called the ring of fractions or localization of Adisplaystyle A by Sdisplaystyle S.

Properties

Cardinality

Z_p is the inverse limit of the finite rings Z/p^k Z, which is uncountable^[9]—in fact, has the cardinality of the continuum. Accordingly, the field Q_p is uncountable. The endomorphism ring of the Prüfer p-group of rank n, denoted Z(p^∞)ⁿ, is the ring of n × n matrices over Z_p; this is sometimes referred to as the Tate module.

The number of p-adic numbers with terminating p-adic representations is countably infinite. And, if the standard digits 0, …, p − 1  are taken, their value and representation coincides in Z_p and R.

Topology

A scheme showing the topology of the dyadic (or indeed p-adic) integers. Each clump is an open set made up of other clumps. The numbers in the left-most quarter (containing 1) are all the odd numbers. The next group to the right is the even numbers not divisible by 4.

Define a topology on Z_p by taking as a basis of open sets all sets of the form

U_a(n) = n + λp^a : λ ∈ Z_p.

where a is a non-negative integer and n is an integer in [1, p^a]. For example, in the dyadic integers, U₁(1) is the set of odd numbers. U_a(n) is the set of all p-adic integers whose difference from n has p-adic absolute value less than p^1−a. Then Z_p is a compactification of Z, under the derived topology (it is not a compactification of Z with its usual discrete topology). The relative topology on Z as a subset of Z_p is called the p-adic topology on Z.

The topology of Z_p is that of a Cantor set Cdisplaystyle mathcal C.^[10] For instance, we can make a continuous 1-to-1 mapping between the dyadic integers and the Cantor set expressed in base 3 by mapping
…d2d1d0displaystyle dots d_2d_1d_0
in Z₂ to
0.e0e1e2…3displaystyle 0.e_0e_1e_2dots _3
in Cdisplaystyle mathcal C, where
en=2dn.displaystyle e_n=2d_n.
The topology of Q_p is that of a Cantor set minus any point.^{[citation needed]} In particular, Z_p is compact while Q_p is not; it is only locally compact. As metric spaces, both Z_p and Q_p are complete.^[11]

Metric completions and algebraic closures

Q_p contains Q and is a field of characteristic 0. This field cannot be turned into an ordered field.

R has only a single proper algebraic extension: C; in other words, this quadratic extension is already algebraically closed. By contrast, the algebraic closure of Q_p, denoted Qp¯,displaystyle overline mathbf Q _p, has infinite degree,^[12] i.e. Q_p has infinitely many inequivalent algebraic extensions. Also contrasting the case of real numbers, although there is a unique extension of the p-adic valuation to Qp¯,displaystyle overline mathbf Q _p, the latter is not (metrically) complete.^[13][14] Its (metric) completion is called C_p or Ω_p.^[14][15] Here an end is reached, as C_p is algebraically closed.^[14][16] However unlike C this field is not locally compact.^[15]

C_p and C are isomorphic as rings, so we may regard C_p as C endowed with an exotic metric. It should be noted that the proof of existence of such a field isomorphism relies on the axiom of choice, and does not provide an explicit example of such an isomorphism (i.e., it is not constructive).

If K is a finite Galois extension of Q_p, the Galois group Gal(K/Qp)displaystyle textGalleft(mathbf K /mathbf Q _pright) is solvable. Thus, the Galois group Gal(Qp¯/Qp)displaystyle textGalleft(overline mathbf Q _p/mathbf Q _pright) is prosolvable.

Multiplicative group of Q_p

Q_p contains the n-th cyclotomic field (n > 2) if and only if n | p − 1.^[17] For instance, the n-th cyclotomic field is a subfield of Q₁₃ if and only if n = 1, 2, 3, 4, 6, or 12. In particular, there is no multiplicative p-torsion in Q_p, if p > 2. Also, −1 is the only non-trivial torsion element in Q₂.

Given a natural number k, the index of the multiplicative group of the k-th powers of the non-zero elements of Q_p in Q^×
_p is finite.

The number e, defined as the sum of reciprocals of factorials, is not a member of any p-adic field; but e^p ∈ Q_p (p ≠ 2). For p = 2 one must take at least the fourth power.^[18] (Thus a number with similar properties as e — namely a p-th root of e^p — is a member of Qp¯displaystyle overline mathbf Q _p for all p.)

Analysis on Q_p

The only real functions whose derivative is zero are the constant functions. This is not true over Q_p.^[19] For instance, the function

f:Qp→Qpf(x)={|x|p−2x≠00x=0displaystyle beginaligned&f:mathbf Q _pto mathbf Q _p\&f(x)=begincasesendaligned

has zero derivative everywhere but is not even locally constant at 0.

If we let R be denoted Q_∞, then given any elements r_∞, r₂, r₃, r₅, r₇, ... where r_p ∈ Q_p, it is possible to find a sequence (x_n) in Q such that for all p (including ∞), the limit of x_n in Q_p is r_p.

Rational arithmetic

Eric Hehner and Nigel Horspool proposed in 1979 the use of a p-adic representation for rational numbers on computers^[20] called Quote notation. The primary advantage of such a representation is that addition, subtraction, and multiplication can be done in a straightforward manner analogous to similar methods for binary integers; and division is even simpler, resembling multiplication. However, it has the disadvantage that representations can be much larger than simply storing the numerator and denominator in binary (for more details see Quote notation#Length of representation).

Generalizations and related concepts

The reals and the p-adic numbers are the completions of the rationals; it is also possible to complete other fields, for instance general algebraic number fields, in an analogous way. This will be described now.

Suppose D is a Dedekind domain and E is its field of fractions. Pick a non-zero prime ideal P of D. If x is a non-zero element of E, then xD is a fractional ideal and can be uniquely factored as a product of positive and negative powers of non-zero prime ideals of D. We write ord_P(x) for the exponent of P in this factorization, and for any choice of number c greater than 1 we can set

|x|P=c−ordP⁡(x).x

Completing with respect to this absolute value |.|_P yields a field E_P, the proper generalization of the field of p-adic numbers to this setting. The choice of c does not change the completion (different choices yield the same concept of Cauchy sequence, so the same completion). It is convenient, when the residue field D/P is finite, to take for c the size of D/P.

For example, when E is a number field, Ostrowski's theorem says that every non-trivial non-Archimedean absolute value on E arises as some |.|_P. The remaining non-trivial absolute values on E arise from the different embeddings of E into the real or complex numbers. (In fact, the non-Archimedean absolute values can be considered as simply the different embeddings of E into the fields C_p, thus putting the description of all
the non-trivial absolute values of a number field on a common footing.)

Often, one needs to simultaneously keep track of all the above-mentioned completions when E is a number field (or more generally a global field), which are seen as encoding "local" information. This is accomplished by adele rings and idele groups.

Local–global principle

Helmut Hasse's local–global principle is said to hold for an equation if it can be solved over the rational numbers if and only if it can be solved over the real numbers and over the p-adic numbers for every prime p. This principle holds e.g. for equations given by quadratic forms, but fails for higher polynomials in several indeterminates.

See also

Footnotes

Notes

Citations

References

Further reading

External links

Wikimedia Commons has media related to P-adic numbers.

• Weisstein, Eric W. "p-adic Number". MathWorld.


• 
  "p-adic integers". PlanetMath.
  


• 
  p-adic number at Springer On-line Encyclopaedia of Mathematics
  


• 
  Completion of Algebraic Closure – on-line lecture notes by Brian Conrad


• 
  An Introduction to p-adic Numbers and p-adic Analysis - on-line lecture notes by Andrew Baker, 2007


• 
  Efficient p-adic arithmetic (slides)


• Introduction to p-adic numbers