Django stuck after runserver
up vote
2
down vote
favorite
I am new to Django, and am trying to get the server set up.
I have created my project folder (containing manage.py) and after running
python manage.py runserver
it gets stuck after these messages
System check identified no issues (0 silenced).
You have 15 unapplied migration(s). Your project may not work properly until you apply the migrations for app(s): admin, auth, contenttypes, sessions.
Run 'python manage.py migrate' to apply them.
November 11, 2018 - 18:17:53
Django version 2.1.3, using settings 'MyProject.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CTRL-BREAK.
There is a minute or so pause and then these show up.
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
After that it just stays there, I cannot type anything or do anything.
python django
asked Nov 11 at 23:39
Andrew Zaw
605
|
show 3 more comments
up vote
2
down vote
favorite
I am new to Django, and am trying to get the server set up.
I have created my project folder (containing manage.py) and after running
python manage.py runserver
it gets stuck after these messages
System check identified no issues (0 silenced).
You have 15 unapplied migration(s). Your project may not work properly until you apply the migrations for app(s): admin, auth, contenttypes, sessions.
Run 'python manage.py migrate' to apply them.
November 11, 2018 - 18:17:53
Django version 2.1.3, using settings 'MyProject.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CTRL-BREAK.
There is a minute or so pause and then these show up.
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
After that it just stays there, I cannot type anything or do anything.
python django
asked Nov 11 at 23:39
Andrew Zaw
605
You're not supposed to be able to type anything (you just leave it running and Ctrl+C to stop it when you're done)... what is it you expect to be able to do?
– Jon Clements♦
Nov 11 at 23:40
I want to type "python manage.py startapp". Also, what is the reason for the GET lines and why do they appear a lot later?
– Andrew Zaw
Nov 11 at 23:41
1
Well... either cancel the running server and do it as a separate command, or open another command/shell window and execute it there? "runserver" is not meant to be an interactive prompt... it's just meant to run the development server for you to test your app.
– Jon Clements♦
Nov 11 at 23:41
It says you have 15 unapplied migrations, consider runningpython manage.py migratebefore starting the server to install the models into your database for your app to work.
– Pitt
Nov 11 at 23:42
1
TheGET linesare HTTP GET requests that your django server received, this is the normal behaviour of your server and shows you that it is actually running and working correctly
– Pitt
Nov 11 at 23:43
|
show 3 more comments
up vote
2
down vote
favorite
up vote
2
down vote
favorite
I am new to Django, and am trying to get the server set up.
I have created my project folder (containing manage.py) and after running
python manage.py runserver
it gets stuck after these messages
System check identified no issues (0 silenced).
You have 15 unapplied migration(s). Your project may not work properly until you apply the migrations for app(s): admin, auth, contenttypes, sessions.
Run 'python manage.py migrate' to apply them.
November 11, 2018 - 18:17:53
Django version 2.1.3, using settings 'MyProject.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CTRL-BREAK.
There is a minute or so pause and then these show up.
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
After that it just stays there, I cannot type anything or do anything.
python django
asked Nov 11 at 23:39
Andrew Zaw
605
I am new to Django, and am trying to get the server set up.
I have created my project folder (containing manage.py) and after running
python manage.py runserver
it gets stuck after these messages
System check identified no issues (0 silenced).
You have 15 unapplied migration(s). Your project may not work properly until you apply the migrations for app(s): admin, auth, contenttypes, sessions.
Run 'python manage.py migrate' to apply them.
November 11, 2018 - 18:17:53
Django version 2.1.3, using settings 'MyProject.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CTRL-BREAK.
There is a minute or so pause and then these show up.
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
After that it just stays there, I cannot type anything or do anything.
python django
python django
asked Nov 11 at 23:39
Andrew Zaw
605
asked Nov 11 at 23:39
Andrew Zaw
605
asked Nov 11 at 23:39
Andrew Zaw
605
asked Nov 11 at 23:39
Andrew Zaw
605
asked Nov 11 at 23:39
Andrew Zaw
605
605
You're not supposed to be able to type anything (you just leave it running and Ctrl+C to stop it when you're done)... what is it you expect to be able to do?
– Jon Clements♦
Nov 11 at 23:40
I want to type "python manage.py startapp". Also, what is the reason for the GET lines and why do they appear a lot later?
– Andrew Zaw
Nov 11 at 23:41
1
Well... either cancel the running server and do it as a separate command, or open another command/shell window and execute it there? "runserver" is not meant to be an interactive prompt... it's just meant to run the development server for you to test your app.
– Jon Clements♦
Nov 11 at 23:41
It says you have 15 unapplied migrations, consider runningpython manage.py migratebefore starting the server to install the models into your database for your app to work.
– Pitt
Nov 11 at 23:42
1
TheGET linesare HTTP GET requests that your django server received, this is the normal behaviour of your server and shows you that it is actually running and working correctly
– Pitt
Nov 11 at 23:43
|
show 3 more comments
You're not supposed to be able to type anything (you just leave it running and Ctrl+C to stop it when you're done)... what is it you expect to be able to do?
– Jon Clements♦
Nov 11 at 23:40
I want to type "python manage.py startapp". Also, what is the reason for the GET lines and why do they appear a lot later?
– Andrew Zaw
Nov 11 at 23:41
1
Well... either cancel the running server and do it as a separate command, or open another command/shell window and execute it there? "runserver" is not meant to be an interactive prompt... it's just meant to run the development server for you to test your app.
– Jon Clements♦
Nov 11 at 23:41
It says you have 15 unapplied migrations, consider runningpython manage.py migratebefore starting the server to install the models into your database for your app to work.
– Pitt
Nov 11 at 23:42
1
TheGET linesare HTTP GET requests that your django server received, this is the normal behaviour of your server and shows you that it is actually running and working correctly
– Pitt
Nov 11 at 23:43
You're not supposed to be able to type anything (you just leave it running and Ctrl+C to stop it when you're done)... what is it you expect to be able to do?
– Jon Clements♦
Nov 11 at 23:40
You're not supposed to be able to type anything (you just leave it running and Ctrl+C to stop it when you're done)... what is it you expect to be able to do?
– Jon Clements♦
Nov 11 at 23:40
I want to type "python manage.py startapp". Also, what is the reason for the GET lines and why do they appear a lot later?
– Andrew Zaw
Nov 11 at 23:41
I want to type "python manage.py startapp". Also, what is the reason for the GET lines and why do they appear a lot later?
– Andrew Zaw
Nov 11 at 23:41
1
1
Well... either cancel the running server and do it as a separate command, or open another command/shell window and execute it there? "runserver" is not meant to be an interactive prompt... it's just meant to run the development server for you to test your app.
– Jon Clements♦
Nov 11 at 23:41
Well... either cancel the running server and do it as a separate command, or open another command/shell window and execute it there? "runserver" is not meant to be an interactive prompt... it's just meant to run the development server for you to test your app.
– Jon Clements♦
Nov 11 at 23:41
It says you have 15 unapplied migrations, consider running
python manage.py migrate before starting the server to install the models into your database for your app to work.– Pitt
Nov 11 at 23:42
It says you have 15 unapplied migrations, consider running
python manage.py migrate before starting the server to install the models into your database for your app to work.– Pitt
Nov 11 at 23:42
1
1
The
GET lines are HTTP GET requests that your django server received, this is the normal behaviour of your server and shows you that it is actually running and working correctly– Pitt
Nov 11 at 23:43
The
GET lines are HTTP GET requests that your django server received, this is the normal behaviour of your server and shows you that it is actually running and working correctly– Pitt
Nov 11 at 23:43
|
show 3 more comments
4 Answers
4
active
oldest
votes
up vote
0
down vote
To clarify the behaviour of the runserver command, you should use the doc
Starts a lightweight development Web server on the local machine.
Since a server continously listen for connections, it's fine that you don't get the prompt back. If needed, you could use python manage.py runserver & to run the server in the background of your shell, or just open another window/tab.
Remember that, to test your website, you have to keep the server open.
answered Nov 12 at 0:27
WayToDoor
371214
Sounds like someone downvoted all the answers here... Why tho ?
– WayToDoor
Nov 12 at 9:17
1
And I up voted them since I see that the answers were quite good answers. :) Sometimes few people here just need a good hair cut, nothing else...:)
– Zollie
Nov 13 at 9:48
1
Every answer (including yours now :p) is back at 0 upvotes :)
– WayToDoor
Nov 13 at 16:09
add a comment |
up vote
0
down vote
First of all don't forget the Django documentation is your friend (even if it's a bit unfriendly).
You are doing everything correctly and the terminal is out putting any requests made to the application:
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
That means you connected to http://127.0.0.1:8000/ at the root domain, with which 3 fonts also got sent to the requesting browser/connection.
What to do now
I would highly suggest you follow a simple tutorial like this one, step by step, then follow other tutorials and find what works best for you.
An alternative idea
I have tried long and hard to enjoy using Django and for over 6 months I was unhappy working and struggling to get it to work flawlessly. So I found Flask to be a much better alternative and much easier to learn and continue to work with. I recently came across Quart, which is an asynchronous fork of Flask, and have not looked back since. We can literally build a fully functioning web application shell in a matter of minutes with the help of various Flask extensions.
answered Nov 12 at 0:18
Jack Herer
315112
Actually yesterday up voted your answer too, after all answers were down voted by someone earlier. I liked contributors' answers here on this simple question...
– Zollie
Nov 13 at 9:53
add a comment |
up vote
0
down vote
Quit the server with CTRL-BREAK. # (CTRL-C on many keyboards)
Then you can run your further python commands what you would like to on your projects in command line.
answered Nov 12 at 6:19
Zollie
35915
Down voted because this is not really good advice, the OP's question was not "How can stop the server running?"The OP can always run other commands in another terminal tab/window. Besides the OP may want to keep the server running. so your answer is actually not very good for the OP or others.
– Jack Herer
Nov 13 at 8:47
It's partially true, since if you try to really understand what the OP situation was, obviously he did not really understand that during running the server, you cannot type in the same console window. So, his question was not at all about how to open and type in a new console window during running the server in another window. So the OP does not understand that you have to quite from the server and then you can continue to run commands regarding your projects in that console window. I just did not want to explain this, since it was explained already here by others.
– Zollie
Nov 13 at 9:33
So that's why I tried to answer this very simply on the point. Then the OP will learn about how to open more console windows and work on them. But first he has to understand that you cannot type in a console window during the server is running in that console window. I hope that you can grasp the concept of my simple answer on this..
– Zollie
Nov 13 at 9:37
And the OP nowhere wrote that he wanted to keep the server running. Read his post/question again if you do not understand his post...
– Zollie
Nov 13 at 11:08
add a comment |
up vote
-3
down vote
You need to migrate your database.
$ python manage.py makamigrations your_app_name
$ python manage.py migrate
That is all you need to do, and then restart the server.
answered Nov 12 at 2:15
Algebra
111
Op problem isn't the migrations (altrough they have to do them), but more likely being stuck in the runserver subcommand
– WayToDoor
Nov 12 at 9:28
Down voted because the answer is unrelated to the question.
– Jack Herer
Nov 13 at 8:48
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
StackExchange.using("externalEditor", function ()
StackExchange.using("snippets", function ()
StackExchange.snippets.init();
);
);
, "code-snippets");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "1"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53254348%2fdjango-stuck-after-runserver%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
To clarify the behaviour of the runserver command, you should use the doc
Starts a lightweight development Web server on the local machine.
Since a server continously listen for connections, it's fine that you don't get the prompt back. If needed, you could use python manage.py runserver & to run the server in the background of your shell, or just open another window/tab.
Remember that, to test your website, you have to keep the server open.
answered Nov 12 at 0:27
WayToDoor
371214
Sounds like someone downvoted all the answers here... Why tho ?
– WayToDoor
Nov 12 at 9:17
1
And I up voted them since I see that the answers were quite good answers. :) Sometimes few people here just need a good hair cut, nothing else...:)
– Zollie
Nov 13 at 9:48
1
Every answer (including yours now :p) is back at 0 upvotes :)
– WayToDoor
Nov 13 at 16:09
add a comment |
up vote
0
down vote
To clarify the behaviour of the runserver command, you should use the doc
Starts a lightweight development Web server on the local machine.
Since a server continously listen for connections, it's fine that you don't get the prompt back. If needed, you could use python manage.py runserver & to run the server in the background of your shell, or just open another window/tab.
Remember that, to test your website, you have to keep the server open.
answered Nov 12 at 0:27
WayToDoor
371214
Sounds like someone downvoted all the answers here... Why tho ?
– WayToDoor
Nov 12 at 9:17
1
And I up voted them since I see that the answers were quite good answers. :) Sometimes few people here just need a good hair cut, nothing else...:)
– Zollie
Nov 13 at 9:48
1
Every answer (including yours now :p) is back at 0 upvotes :)
– WayToDoor
Nov 13 at 16:09
add a comment |
up vote
0
down vote
up vote
0
down vote
To clarify the behaviour of the runserver command, you should use the doc
Starts a lightweight development Web server on the local machine.
Since a server continously listen for connections, it's fine that you don't get the prompt back. If needed, you could use python manage.py runserver & to run the server in the background of your shell, or just open another window/tab.
Remember that, to test your website, you have to keep the server open.
answered Nov 12 at 0:27
WayToDoor
371214
To clarify the behaviour of the runserver command, you should use the doc
Starts a lightweight development Web server on the local machine.
Since a server continously listen for connections, it's fine that you don't get the prompt back. If needed, you could use python manage.py runserver & to run the server in the background of your shell, or just open another window/tab.
Remember that, to test your website, you have to keep the server open.
answered Nov 12 at 0:27
WayToDoor
371214
answered Nov 12 at 0:27
WayToDoor
371214
answered Nov 12 at 0:27
WayToDoor
371214
answered Nov 12 at 0:27
WayToDoor
371214
371214
Sounds like someone downvoted all the answers here... Why tho ?
– WayToDoor
Nov 12 at 9:17
1
And I up voted them since I see that the answers were quite good answers. :) Sometimes few people here just need a good hair cut, nothing else...:)
– Zollie
Nov 13 at 9:48
1
Every answer (including yours now :p) is back at 0 upvotes :)
– WayToDoor
Nov 13 at 16:09
add a comment |
Sounds like someone downvoted all the answers here... Why tho ?
– WayToDoor
Nov 12 at 9:17
1
And I up voted them since I see that the answers were quite good answers. :) Sometimes few people here just need a good hair cut, nothing else...:)
– Zollie
Nov 13 at 9:48
1
Every answer (including yours now :p) is back at 0 upvotes :)
– WayToDoor
Nov 13 at 16:09
Sounds like someone downvoted all the answers here... Why tho ?
– WayToDoor
Nov 12 at 9:17
Sounds like someone downvoted all the answers here... Why tho ?
– WayToDoor
Nov 12 at 9:17
1
1
And I up voted them since I see that the answers were quite good answers. :) Sometimes few people here just need a good hair cut, nothing else...:)
– Zollie
Nov 13 at 9:48
And I up voted them since I see that the answers were quite good answers. :) Sometimes few people here just need a good hair cut, nothing else...:)
– Zollie
Nov 13 at 9:48
1
1
Every answer (including yours now :p) is back at 0 upvotes :)
– WayToDoor
Nov 13 at 16:09
Every answer (including yours now :p) is back at 0 upvotes :)
– WayToDoor
Nov 13 at 16:09
add a comment |
up vote
0
down vote
First of all don't forget the Django documentation is your friend (even if it's a bit unfriendly).
You are doing everything correctly and the terminal is out putting any requests made to the application:
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
That means you connected to http://127.0.0.1:8000/ at the root domain, with which 3 fonts also got sent to the requesting browser/connection.
What to do now
I would highly suggest you follow a simple tutorial like this one, step by step, then follow other tutorials and find what works best for you.
An alternative idea
I have tried long and hard to enjoy using Django and for over 6 months I was unhappy working and struggling to get it to work flawlessly. So I found Flask to be a much better alternative and much easier to learn and continue to work with. I recently came across Quart, which is an asynchronous fork of Flask, and have not looked back since. We can literally build a fully functioning web application shell in a matter of minutes with the help of various Flask extensions.
answered Nov 12 at 0:18
Jack Herer
315112
Actually yesterday up voted your answer too, after all answers were down voted by someone earlier. I liked contributors' answers here on this simple question...
– Zollie
Nov 13 at 9:53
add a comment |
up vote
0
down vote
First of all don't forget the Django documentation is your friend (even if it's a bit unfriendly).
You are doing everything correctly and the terminal is out putting any requests made to the application:
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
That means you connected to http://127.0.0.1:8000/ at the root domain, with which 3 fonts also got sent to the requesting browser/connection.
What to do now
I would highly suggest you follow a simple tutorial like this one, step by step, then follow other tutorials and find what works best for you.
An alternative idea
I have tried long and hard to enjoy using Django and for over 6 months I was unhappy working and struggling to get it to work flawlessly. So I found Flask to be a much better alternative and much easier to learn and continue to work with. I recently came across Quart, which is an asynchronous fork of Flask, and have not looked back since. We can literally build a fully functioning web application shell in a matter of minutes with the help of various Flask extensions.
answered Nov 12 at 0:18
Jack Herer
315112
Actually yesterday up voted your answer too, after all answers were down voted by someone earlier. I liked contributors' answers here on this simple question...
– Zollie
Nov 13 at 9:53
add a comment |
up vote
0
down vote
up vote
0
down vote
First of all don't forget the Django documentation is your friend (even if it's a bit unfriendly).
You are doing everything correctly and the terminal is out putting any requests made to the application:
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
That means you connected to http://127.0.0.1:8000/ at the root domain, with which 3 fonts also got sent to the requesting browser/connection.
What to do now
I would highly suggest you follow a simple tutorial like this one, step by step, then follow other tutorials and find what works best for you.
An alternative idea
I have tried long and hard to enjoy using Django and for over 6 months I was unhappy working and struggling to get it to work flawlessly. So I found Flask to be a much better alternative and much easier to learn and continue to work with. I recently came across Quart, which is an asynchronous fork of Flask, and have not looked back since. We can literally build a fully functioning web application shell in a matter of minutes with the help of various Flask extensions.
answered Nov 12 at 0:18
Jack Herer
315112
First of all don't forget the Django documentation is your friend (even if it's a bit unfriendly).
You are doing everything correctly and the terminal is out putting any requests made to the application:
[11/Nov/2018 18:18:46] "GET / HTTP/1.1" 200 16348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Regular-webfont.woff HTTP/1.1" 200 80304
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Light-webfont.woff HTTP/1.1" 200 81348
[11/Nov/2018 18:18:47] "GET /static/admin/fonts/Roboto-Bold-webfont.woff HTTP/1.1" 200 82564
That means you connected to http://127.0.0.1:8000/ at the root domain, with which 3 fonts also got sent to the requesting browser/connection.
What to do now
I would highly suggest you follow a simple tutorial like this one, step by step, then follow other tutorials and find what works best for you.
An alternative idea
I have tried long and hard to enjoy using Django and for over 6 months I was unhappy working and struggling to get it to work flawlessly. So I found Flask to be a much better alternative and much easier to learn and continue to work with. I recently came across Quart, which is an asynchronous fork of Flask, and have not looked back since. We can literally build a fully functioning web application shell in a matter of minutes with the help of various Flask extensions.
answered Nov 12 at 0:18
Jack Herer
315112
edited Nov 12 at 0:38
answered Nov 12 at 0:18
Jack Herer
315112
answered Nov 12 at 0:18
Jack Herer
315112
answered Nov 12 at 0:18
Jack Herer
315112
315112
Actually yesterday up voted your answer too, after all answers were down voted by someone earlier. I liked contributors' answers here on this simple question...
– Zollie
Nov 13 at 9:53
add a comment |
Actually yesterday up voted your answer too, after all answers were down voted by someone earlier. I liked contributors' answers here on this simple question...
– Zollie
Nov 13 at 9:53
Actually yesterday up voted your answer too, after all answers were down voted by someone earlier. I liked contributors' answers here on this simple question...
– Zollie
Nov 13 at 9:53
Actually yesterday up voted your answer too, after all answers were down voted by someone earlier. I liked contributors' answers here on this simple question...
– Zollie
Nov 13 at 9:53
add a comment |
up vote
0
down vote
Quit the server with CTRL-BREAK. # (CTRL-C on many keyboards)
Then you can run your further python commands what you would like to on your projects in command line.
answered Nov 12 at 6:19
Zollie
35915
Down voted because this is not really good advice, the OP's question was not "How can stop the server running?"The OP can always run other commands in another terminal tab/window. Besides the OP may want to keep the server running. so your answer is actually not very good for the OP or others.
– Jack Herer
Nov 13 at 8:47
It's partially true, since if you try to really understand what the OP situation was, obviously he did not really understand that during running the server, you cannot type in the same console window. So, his question was not at all about how to open and type in a new console window during running the server in another window. So the OP does not understand that you have to quite from the server and then you can continue to run commands regarding your projects in that console window. I just did not want to explain this, since it was explained already here by others.
– Zollie
Nov 13 at 9:33
So that's why I tried to answer this very simply on the point. Then the OP will learn about how to open more console windows and work on them. But first he has to understand that you cannot type in a console window during the server is running in that console window. I hope that you can grasp the concept of my simple answer on this..
– Zollie
Nov 13 at 9:37
And the OP nowhere wrote that he wanted to keep the server running. Read his post/question again if you do not understand his post...
– Zollie
Nov 13 at 11:08
add a comment |
up vote
0
down vote
Quit the server with CTRL-BREAK. # (CTRL-C on many keyboards)
Then you can run your further python commands what you would like to on your projects in command line.
answered Nov 12 at 6:19
Zollie
35915
Down voted because this is not really good advice, the OP's question was not "How can stop the server running?"The OP can always run other commands in another terminal tab/window. Besides the OP may want to keep the server running. so your answer is actually not very good for the OP or others.
– Jack Herer
Nov 13 at 8:47
It's partially true, since if you try to really understand what the OP situation was, obviously he did not really understand that during running the server, you cannot type in the same console window. So, his question was not at all about how to open and type in a new console window during running the server in another window. So the OP does not understand that you have to quite from the server and then you can continue to run commands regarding your projects in that console window. I just did not want to explain this, since it was explained already here by others.
– Zollie
Nov 13 at 9:33
So that's why I tried to answer this very simply on the point. Then the OP will learn about how to open more console windows and work on them. But first he has to understand that you cannot type in a console window during the server is running in that console window. I hope that you can grasp the concept of my simple answer on this..
– Zollie
Nov 13 at 9:37
And the OP nowhere wrote that he wanted to keep the server running. Read his post/question again if you do not understand his post...
– Zollie
Nov 13 at 11:08
add a comment |
up vote
0
down vote
up vote
0
down vote
Quit the server with CTRL-BREAK. # (CTRL-C on many keyboards)
Then you can run your further python commands what you would like to on your projects in command line.
answered Nov 12 at 6:19
Zollie
35915
Quit the server with CTRL-BREAK. # (CTRL-C on many keyboards)
Then you can run your further python commands what you would like to on your projects in command line.
answered Nov 12 at 6:19
Zollie
35915
answered Nov 12 at 6:19
Zollie
35915
answered Nov 12 at 6:19
Zollie
35915
answered Nov 12 at 6:19
Zollie
35915
35915
Down voted because this is not really good advice, the OP's question was not "How can stop the server running?"The OP can always run other commands in another terminal tab/window. Besides the OP may want to keep the server running. so your answer is actually not very good for the OP or others.
– Jack Herer
Nov 13 at 8:47
It's partially true, since if you try to really understand what the OP situation was, obviously he did not really understand that during running the server, you cannot type in the same console window. So, his question was not at all about how to open and type in a new console window during running the server in another window. So the OP does not understand that you have to quite from the server and then you can continue to run commands regarding your projects in that console window. I just did not want to explain this, since it was explained already here by others.
– Zollie
Nov 13 at 9:33
So that's why I tried to answer this very simply on the point. Then the OP will learn about how to open more console windows and work on them. But first he has to understand that you cannot type in a console window during the server is running in that console window. I hope that you can grasp the concept of my simple answer on this..
– Zollie
Nov 13 at 9:37
And the OP nowhere wrote that he wanted to keep the server running. Read his post/question again if you do not understand his post...
– Zollie
Nov 13 at 11:08
add a comment |
Down voted because this is not really good advice, the OP's question was not "How can stop the server running?"The OP can always run other commands in another terminal tab/window. Besides the OP may want to keep the server running. so your answer is actually not very good for the OP or others.
– Jack Herer
Nov 13 at 8:47
It's partially true, since if you try to really understand what the OP situation was, obviously he did not really understand that during running the server, you cannot type in the same console window. So, his question was not at all about how to open and type in a new console window during running the server in another window. So the OP does not understand that you have to quite from the server and then you can continue to run commands regarding your projects in that console window. I just did not want to explain this, since it was explained already here by others.
– Zollie
Nov 13 at 9:33
So that's why I tried to answer this very simply on the point. Then the OP will learn about how to open more console windows and work on them. But first he has to understand that you cannot type in a console window during the server is running in that console window. I hope that you can grasp the concept of my simple answer on this..
– Zollie
Nov 13 at 9:37
And the OP nowhere wrote that he wanted to keep the server running. Read his post/question again if you do not understand his post...
– Zollie
Nov 13 at 11:08
Down voted because this is not really good advice, the OP's question was not "How can stop the server running?"The OP can always run other commands in another terminal tab/window. Besides the OP may want to keep the server running. so your answer is actually not very good for the OP or others.
– Jack Herer
Nov 13 at 8:47
Down voted because this is not really good advice, the OP's question was not "How can stop the server running?"The OP can always run other commands in another terminal tab/window. Besides the OP may want to keep the server running. so your answer is actually not very good for the OP or others.
– Jack Herer
Nov 13 at 8:47
It's partially true, since if you try to really understand what the OP situation was, obviously he did not really understand that during running the server, you cannot type in the same console window. So, his question was not at all about how to open and type in a new console window during running the server in another window. So the OP does not understand that you have to quite from the server and then you can continue to run commands regarding your projects in that console window. I just did not want to explain this, since it was explained already here by others.
– Zollie
Nov 13 at 9:33
It's partially true, since if you try to really understand what the OP situation was, obviously he did not really understand that during running the server, you cannot type in the same console window. So, his question was not at all about how to open and type in a new console window during running the server in another window. So the OP does not understand that you have to quite from the server and then you can continue to run commands regarding your projects in that console window. I just did not want to explain this, since it was explained already here by others.
– Zollie
Nov 13 at 9:33
So that's why I tried to answer this very simply on the point. Then the OP will learn about how to open more console windows and work on them. But first he has to understand that you cannot type in a console window during the server is running in that console window. I hope that you can grasp the concept of my simple answer on this..
– Zollie
Nov 13 at 9:37
So that's why I tried to answer this very simply on the point. Then the OP will learn about how to open more console windows and work on them. But first he has to understand that you cannot type in a console window during the server is running in that console window. I hope that you can grasp the concept of my simple answer on this..
– Zollie
Nov 13 at 9:37
And the OP nowhere wrote that he wanted to keep the server running. Read his post/question again if you do not understand his post...
– Zollie
Nov 13 at 11:08
And the OP nowhere wrote that he wanted to keep the server running. Read his post/question again if you do not understand his post...
– Zollie
Nov 13 at 11:08
add a comment |
up vote
-3
down vote
You need to migrate your database.
$ python manage.py makamigrations your_app_name
$ python manage.py migrate
That is all you need to do, and then restart the server.
answered Nov 12 at 2:15
Algebra
111
Op problem isn't the migrations (altrough they have to do them), but more likely being stuck in the runserver subcommand
– WayToDoor
Nov 12 at 9:28
Down voted because the answer is unrelated to the question.
– Jack Herer
Nov 13 at 8:48
add a comment |
up vote
-3
down vote
You need to migrate your database.
$ python manage.py makamigrations your_app_name
$ python manage.py migrate
That is all you need to do, and then restart the server.
answered Nov 12 at 2:15
Algebra
111
Op problem isn't the migrations (altrough they have to do them), but more likely being stuck in the runserver subcommand
– WayToDoor
Nov 12 at 9:28
Down voted because the answer is unrelated to the question.
– Jack Herer
Nov 13 at 8:48
add a comment |
up vote
-3
down vote
up vote
-3
down vote
You need to migrate your database.
$ python manage.py makamigrations your_app_name
$ python manage.py migrate
That is all you need to do, and then restart the server.
answered Nov 12 at 2:15
Algebra
111
You need to migrate your database.
$ python manage.py makamigrations your_app_name
$ python manage.py migrate
That is all you need to do, and then restart the server.
answered Nov 12 at 2:15
Algebra
111
answered Nov 12 at 2:15
Algebra
111
answered Nov 12 at 2:15
Algebra
111
answered Nov 12 at 2:15
Algebra
111
111
Op problem isn't the migrations (altrough they have to do them), but more likely being stuck in the runserver subcommand
– WayToDoor
Nov 12 at 9:28
Down voted because the answer is unrelated to the question.
– Jack Herer
Nov 13 at 8:48
add a comment |
Op problem isn't the migrations (altrough they have to do them), but more likely being stuck in the runserver subcommand
– WayToDoor
Nov 12 at 9:28
Down voted because the answer is unrelated to the question.
– Jack Herer
Nov 13 at 8:48
Op problem isn't the migrations (altrough they have to do them), but more likely being stuck in the runserver subcommand
– WayToDoor
Nov 12 at 9:28
Op problem isn't the migrations (altrough they have to do them), but more likely being stuck in the runserver subcommand
– WayToDoor
Nov 12 at 9:28
Down voted because the answer is unrelated to the question.
– Jack Herer
Nov 13 at 8:48
Down voted because the answer is unrelated to the question.
– Jack Herer
Nov 13 at 8:48
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53254348%2fdjango-stuck-after-runserver%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
You're not supposed to be able to type anything (you just leave it running and Ctrl+C to stop it when you're done)... what is it you expect to be able to do?
– Jon Clements♦
Nov 11 at 23:40
I want to type "python manage.py startapp". Also, what is the reason for the GET lines and why do they appear a lot later?
– Andrew Zaw
Nov 11 at 23:41
1
Well... either cancel the running server and do it as a separate command, or open another command/shell window and execute it there? "runserver" is not meant to be an interactive prompt... it's just meant to run the development server for you to test your app.
– Jon Clements♦
Nov 11 at 23:41
It says you have 15 unapplied migrations, consider running
python manage.py migratebefore starting the server to install the models into your database for your app to work.– Pitt
Nov 11 at 23:42
1
The
GET linesare HTTP GET requests that your django server received, this is the normal behaviour of your server and shows you that it is actually running and working correctly– Pitt
Nov 11 at 23:43