How to check the version of .NET Core in a deployed app?
1
I am trying to interrogate the version of the .NET Core that my web app was compiled with. The app is deployed on a Raspberry Pi 2 with Linux 4.9.28-v7+ armv7l. Not seeing an obvious way to do it.
Is this even possible?
linux asp.net-core .net-core raspberry-pi raspberry-pi2
asked Nov 13 '18 at 4:49
AngryHackerAngryHacker
27.3k76237444
add a comment |
1
I am trying to interrogate the version of the .NET Core that my web app was compiled with. The app is deployed on a Raspberry Pi 2 with Linux 4.9.28-v7+ armv7l. Not seeing an obvious way to do it.
Is this even possible?
linux asp.net-core .net-core raspberry-pi raspberry-pi2
asked Nov 13 '18 at 4:49
AngryHackerAngryHacker
27.3k76237444
Not sure if this helps, but might be related: stackoverflow.com/questions/325918/…
– DMarczak
Nov 13 '18 at 4:54
add a comment |
1
1
1
I am trying to interrogate the version of the .NET Core that my web app was compiled with. The app is deployed on a Raspberry Pi 2 with Linux 4.9.28-v7+ armv7l. Not seeing an obvious way to do it.
Is this even possible?
linux asp.net-core .net-core raspberry-pi raspberry-pi2
asked Nov 13 '18 at 4:49
AngryHackerAngryHacker
27.3k76237444
I am trying to interrogate the version of the .NET Core that my web app was compiled with. The app is deployed on a Raspberry Pi 2 with Linux 4.9.28-v7+ armv7l. Not seeing an obvious way to do it.
Is this even possible?
linux asp.net-core .net-core raspberry-pi raspberry-pi2
linux asp.net-core .net-core raspberry-pi raspberry-pi2
asked Nov 13 '18 at 4:49
AngryHackerAngryHacker
27.3k76237444
asked Nov 13 '18 at 4:49
AngryHackerAngryHacker
27.3k76237444
asked Nov 13 '18 at 4:49
AngryHackerAngryHacker
27.3k76237444
asked Nov 13 '18 at 4:49
AngryHackerAngryHacker
27.3k76237444
asked Nov 13 '18 at 4:49
AngryHackerAngryHacker
27.3k76237444
27.3k76237444
Not sure if this helps, but might be related: stackoverflow.com/questions/325918/…
– DMarczak
Nov 13 '18 at 4:54
add a comment |
Not sure if this helps, but might be related: stackoverflow.com/questions/325918/…
– DMarczak
Nov 13 '18 at 4:54
Not sure if this helps, but might be related: stackoverflow.com/questions/325918/…
– DMarczak
Nov 13 '18 at 4:54
Not sure if this helps, but might be related: stackoverflow.com/questions/325918/…
– DMarczak
Nov 13 '18 at 4:54
add a comment |
1 Answer
1
active
oldest
votes
1
You can use the following snippet:
var framework = Assembly
.GetEntryAssembly()?
.GetCustomAttribute<TargetFrameworkAttribute>()?
.FrameworkName;
var stats = new
OsPlatform = System.Runtime.InteropServices.RuntimeInformation.OSDescription,
AspDotnetVersion = framework
;
Code found on: weblog.west-wind.com
When run on my pc it returns:
Microsoft Windows 10.0.17134
.NETCoreApp,Version=v2.1
answered Nov 14 '18 at 12:34
SynerCoderSynerCoder
10.1k43771
The app is already deployed. I need to interrogate the deployed app - source can't be changed.
– AngryHacker
Nov 14 '18 at 18:44
If you have access to the dll files you can load on of those assemblies. Instead of callingAssembly.GetEntryAssembly()you call 'Assembly.LoadFile("Path/too/app.dll")'
– SynerCoder
Nov 15 '18 at 8:45
If you wish to get the .version using http... no way unless you created the app to provide that version inside a http header or something. And that can be done using the code in my answer to get the version, and the on every request set a header with that data.
– SynerCoder
Nov 15 '18 at 8:47
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
StackExchange.using("externalEditor", function ()
StackExchange.using("snippets", function ()
StackExchange.snippets.init();
);
);
, "code-snippets");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "1"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53273998%2fhow-to-check-the-version-of-net-core-in-a-deployed-app%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
1
You can use the following snippet:
var framework = Assembly
.GetEntryAssembly()?
.GetCustomAttribute<TargetFrameworkAttribute>()?
.FrameworkName;
var stats = new
OsPlatform = System.Runtime.InteropServices.RuntimeInformation.OSDescription,
AspDotnetVersion = framework
;
Code found on: weblog.west-wind.com
When run on my pc it returns:
Microsoft Windows 10.0.17134
.NETCoreApp,Version=v2.1
answered Nov 14 '18 at 12:34
SynerCoderSynerCoder
10.1k43771
The app is already deployed. I need to interrogate the deployed app - source can't be changed.
– AngryHacker
Nov 14 '18 at 18:44
If you have access to the dll files you can load on of those assemblies. Instead of callingAssembly.GetEntryAssembly()you call 'Assembly.LoadFile("Path/too/app.dll")'
– SynerCoder
Nov 15 '18 at 8:45
If you wish to get the .version using http... no way unless you created the app to provide that version inside a http header or something. And that can be done using the code in my answer to get the version, and the on every request set a header with that data.
– SynerCoder
Nov 15 '18 at 8:47
add a comment |
1
You can use the following snippet:
var framework = Assembly
.GetEntryAssembly()?
.GetCustomAttribute<TargetFrameworkAttribute>()?
.FrameworkName;
var stats = new
OsPlatform = System.Runtime.InteropServices.RuntimeInformation.OSDescription,
AspDotnetVersion = framework
;
Code found on: weblog.west-wind.com
When run on my pc it returns:
Microsoft Windows 10.0.17134
.NETCoreApp,Version=v2.1
answered Nov 14 '18 at 12:34
SynerCoderSynerCoder
10.1k43771
The app is already deployed. I need to interrogate the deployed app - source can't be changed.
– AngryHacker
Nov 14 '18 at 18:44
If you have access to the dll files you can load on of those assemblies. Instead of callingAssembly.GetEntryAssembly()you call 'Assembly.LoadFile("Path/too/app.dll")'
– SynerCoder
Nov 15 '18 at 8:45
If you wish to get the .version using http... no way unless you created the app to provide that version inside a http header or something. And that can be done using the code in my answer to get the version, and the on every request set a header with that data.
– SynerCoder
Nov 15 '18 at 8:47
add a comment |
1
1
1
You can use the following snippet:
var framework = Assembly
.GetEntryAssembly()?
.GetCustomAttribute<TargetFrameworkAttribute>()?
.FrameworkName;
var stats = new
OsPlatform = System.Runtime.InteropServices.RuntimeInformation.OSDescription,
AspDotnetVersion = framework
;
Code found on: weblog.west-wind.com
When run on my pc it returns:
Microsoft Windows 10.0.17134
.NETCoreApp,Version=v2.1
answered Nov 14 '18 at 12:34
SynerCoderSynerCoder
10.1k43771
You can use the following snippet:
var framework = Assembly
.GetEntryAssembly()?
.GetCustomAttribute<TargetFrameworkAttribute>()?
.FrameworkName;
var stats = new
OsPlatform = System.Runtime.InteropServices.RuntimeInformation.OSDescription,
AspDotnetVersion = framework
;
Code found on: weblog.west-wind.com
When run on my pc it returns:
Microsoft Windows 10.0.17134
.NETCoreApp,Version=v2.1
answered Nov 14 '18 at 12:34
SynerCoderSynerCoder
10.1k43771
answered Nov 14 '18 at 12:34
SynerCoderSynerCoder
10.1k43771
answered Nov 14 '18 at 12:34
SynerCoderSynerCoder
10.1k43771
answered Nov 14 '18 at 12:34
SynerCoderSynerCoder
10.1k43771
10.1k43771
The app is already deployed. I need to interrogate the deployed app - source can't be changed.
– AngryHacker
Nov 14 '18 at 18:44
If you have access to the dll files you can load on of those assemblies. Instead of callingAssembly.GetEntryAssembly()you call 'Assembly.LoadFile("Path/too/app.dll")'
– SynerCoder
Nov 15 '18 at 8:45
If you wish to get the .version using http... no way unless you created the app to provide that version inside a http header or something. And that can be done using the code in my answer to get the version, and the on every request set a header with that data.
– SynerCoder
Nov 15 '18 at 8:47
add a comment |
The app is already deployed. I need to interrogate the deployed app - source can't be changed.
– AngryHacker
Nov 14 '18 at 18:44
If you have access to the dll files you can load on of those assemblies. Instead of callingAssembly.GetEntryAssembly()you call 'Assembly.LoadFile("Path/too/app.dll")'
– SynerCoder
Nov 15 '18 at 8:45
If you wish to get the .version using http... no way unless you created the app to provide that version inside a http header or something. And that can be done using the code in my answer to get the version, and the on every request set a header with that data.
– SynerCoder
Nov 15 '18 at 8:47
The app is already deployed. I need to interrogate the deployed app - source can't be changed.
– AngryHacker
Nov 14 '18 at 18:44
The app is already deployed. I need to interrogate the deployed app - source can't be changed.
– AngryHacker
Nov 14 '18 at 18:44
If you have access to the dll files you can load on of those assemblies. Instead of calling
Assembly.GetEntryAssembly() you call 'Assembly.LoadFile("Path/too/app.dll")'– SynerCoder
Nov 15 '18 at 8:45
If you have access to the dll files you can load on of those assemblies. Instead of calling
Assembly.GetEntryAssembly() you call 'Assembly.LoadFile("Path/too/app.dll")'– SynerCoder
Nov 15 '18 at 8:45
If you wish to get the .version using http... no way unless you created the app to provide that version inside a http header or something. And that can be done using the code in my answer to get the version, and the on every request set a header with that data.
– SynerCoder
Nov 15 '18 at 8:47
If you wish to get the .version using http... no way unless you created the app to provide that version inside a http header or something. And that can be done using the code in my answer to get the version, and the on every request set a header with that data.
– SynerCoder
Nov 15 '18 at 8:47
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53273998%2fhow-to-check-the-version-of-net-core-in-a-deployed-app%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Not sure if this helps, but might be related: stackoverflow.com/questions/325918/…
– DMarczak
Nov 13 '18 at 4:54