Precise placement of arrow anchors
6
I have a (TikZ) diagram with several "blocks" of text connected by arrows. For reasons the (centers of the) blocks are not precisely horizontally aligned, but I'd still like my vertical arrows to be perfectly, well, vertical. Example:
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path[->] (a) edge (b);
path[red, ->] (a.315) edge (b.130);
endtikzpicture
enddocument
Instead of the black arrow, I'd prefer the red one which I've created by fiddling around with stupid numbers. Hence:
Is there a way to create, automatically, instead of the black arrow-between-centers, an arrow which is (1) perfectly vertical and (2) intersects the original arrow roughly at its center?
tikz-pgf alignment
asked Nov 14 '18 at 14:29
Uli FahrenbergUli Fahrenberg
1025
add a comment |
6
I have a (TikZ) diagram with several "blocks" of text connected by arrows. For reasons the (centers of the) blocks are not precisely horizontally aligned, but I'd still like my vertical arrows to be perfectly, well, vertical. Example:
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path[->] (a) edge (b);
path[red, ->] (a.315) edge (b.130);
endtikzpicture
enddocument
Instead of the black arrow, I'd prefer the red one which I've created by fiddling around with stupid numbers. Hence:
Is there a way to create, automatically, instead of the black arrow-between-centers, an arrow which is (1) perfectly vertical and (2) intersects the original arrow roughly at its center?
tikz-pgf alignment
asked Nov 14 '18 at 14:29
Uli FahrenbergUli Fahrenberg
1025
add a comment |
6
6
6
I have a (TikZ) diagram with several "blocks" of text connected by arrows. For reasons the (centers of the) blocks are not precisely horizontally aligned, but I'd still like my vertical arrows to be perfectly, well, vertical. Example:
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path[->] (a) edge (b);
path[red, ->] (a.315) edge (b.130);
endtikzpicture
enddocument
Instead of the black arrow, I'd prefer the red one which I've created by fiddling around with stupid numbers. Hence:
Is there a way to create, automatically, instead of the black arrow-between-centers, an arrow which is (1) perfectly vertical and (2) intersects the original arrow roughly at its center?
tikz-pgf alignment
asked Nov 14 '18 at 14:29
Uli FahrenbergUli Fahrenberg
1025
I have a (TikZ) diagram with several "blocks" of text connected by arrows. For reasons the (centers of the) blocks are not precisely horizontally aligned, but I'd still like my vertical arrows to be perfectly, well, vertical. Example:
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path[->] (a) edge (b);
path[red, ->] (a.315) edge (b.130);
endtikzpicture
enddocument
Instead of the black arrow, I'd prefer the red one which I've created by fiddling around with stupid numbers. Hence:
Is there a way to create, automatically, instead of the black arrow-between-centers, an arrow which is (1) perfectly vertical and (2) intersects the original arrow roughly at its center?
tikz-pgf alignment
tikz-pgf alignment
asked Nov 14 '18 at 14:29
Uli FahrenbergUli Fahrenberg
1025
asked Nov 14 '18 at 14:29
Uli FahrenbergUli Fahrenberg
1025
edited Nov 14 '18 at 15:24
Uli Fahrenberg
asked Nov 14 '18 at 14:29
Uli FahrenbergUli Fahrenberg
1025
asked Nov 14 '18 at 14:29
Uli FahrenbergUli Fahrenberg
1025
asked Nov 14 '18 at 14:29
Uli FahrenbergUli Fahrenberg
1025
1025
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
4
Or, if you want the arrow to be in the center,
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path (a) -- (b) coordinate[midway] (aux);
draw[->] (a.south -| aux) -- (b.north -| aux);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:40
marmotmarmot
102k4119229
You guys are amazing: this is precisely what I wanted.
– Uli Fahrenberg
Nov 14 '18 at 15:11
+1: What is theauxnode for?
– Dr. Manuel Kuehner
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner It is midway between a and b and placed solely for calculation.
– TeXnician
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner This is a trick to find out (what TikZ thinks is) the middle between the two nodes, which then will determine the horizontal position of the arrow.
– marmot
Nov 14 '18 at 15:20
2
@Dr.ManuelKuehner I guess the best explanation for what|-and-|do can be found here.
– marmot
Nov 14 '18 at 15:25
|
show 2 more comments
6
You can specify the horizontal and vertical position in terms of nodes.
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
draw[->] (b|-a.south) -- (b);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:38
TeXnicianTeXnician
25.1k63389
Nice (+1)... I think that the OP woyld like to useanchor=easttoo in order to not calculating manually the horizontal alignment. So,documentclass[tikz]standalone begindocument tikzsetmynode/.style=rectangle,draw,anchor=east begintikzpicture node[mynode] (a) at (0,0) Some rather long text; node[mynode] (b) at (0,-2) Even more text; draw[->] (b|-a.south) -- (b); endtikzpicture enddocumentwould be an easier way.
– koleygr
Nov 14 '18 at 14:58
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "85"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f459954%2fprecise-placement-of-arrow-anchors%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
4
Or, if you want the arrow to be in the center,
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path (a) -- (b) coordinate[midway] (aux);
draw[->] (a.south -| aux) -- (b.north -| aux);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:40
marmotmarmot
102k4119229
You guys are amazing: this is precisely what I wanted.
– Uli Fahrenberg
Nov 14 '18 at 15:11
+1: What is theauxnode for?
– Dr. Manuel Kuehner
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner It is midway between a and b and placed solely for calculation.
– TeXnician
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner This is a trick to find out (what TikZ thinks is) the middle between the two nodes, which then will determine the horizontal position of the arrow.
– marmot
Nov 14 '18 at 15:20
2
@Dr.ManuelKuehner I guess the best explanation for what|-and-|do can be found here.
– marmot
Nov 14 '18 at 15:25
|
show 2 more comments
4
Or, if you want the arrow to be in the center,
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path (a) -- (b) coordinate[midway] (aux);
draw[->] (a.south -| aux) -- (b.north -| aux);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:40
marmotmarmot
102k4119229
You guys are amazing: this is precisely what I wanted.
– Uli Fahrenberg
Nov 14 '18 at 15:11
+1: What is theauxnode for?
– Dr. Manuel Kuehner
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner It is midway between a and b and placed solely for calculation.
– TeXnician
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner This is a trick to find out (what TikZ thinks is) the middle between the two nodes, which then will determine the horizontal position of the arrow.
– marmot
Nov 14 '18 at 15:20
2
@Dr.ManuelKuehner I guess the best explanation for what|-and-|do can be found here.
– marmot
Nov 14 '18 at 15:25
|
show 2 more comments
4
4
4
Or, if you want the arrow to be in the center,
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path (a) -- (b) coordinate[midway] (aux);
draw[->] (a.south -| aux) -- (b.north -| aux);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:40
marmotmarmot
102k4119229
Or, if you want the arrow to be in the center,
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
path (a) -- (b) coordinate[midway] (aux);
draw[->] (a.south -| aux) -- (b.north -| aux);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:40
marmotmarmot
102k4119229
answered Nov 14 '18 at 14:40
marmotmarmot
102k4119229
answered Nov 14 '18 at 14:40
marmotmarmot
102k4119229
answered Nov 14 '18 at 14:40
marmotmarmot
102k4119229
102k4119229
You guys are amazing: this is precisely what I wanted.
– Uli Fahrenberg
Nov 14 '18 at 15:11
+1: What is theauxnode for?
– Dr. Manuel Kuehner
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner It is midway between a and b and placed solely for calculation.
– TeXnician
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner This is a trick to find out (what TikZ thinks is) the middle between the two nodes, which then will determine the horizontal position of the arrow.
– marmot
Nov 14 '18 at 15:20
2
@Dr.ManuelKuehner I guess the best explanation for what|-and-|do can be found here.
– marmot
Nov 14 '18 at 15:25
|
show 2 more comments
You guys are amazing: this is precisely what I wanted.
– Uli Fahrenberg
Nov 14 '18 at 15:11
+1: What is theauxnode for?
– Dr. Manuel Kuehner
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner It is midway between a and b and placed solely for calculation.
– TeXnician
Nov 14 '18 at 15:19
1
@Dr.ManuelKuehner This is a trick to find out (what TikZ thinks is) the middle between the two nodes, which then will determine the horizontal position of the arrow.
– marmot
Nov 14 '18 at 15:20
2
@Dr.ManuelKuehner I guess the best explanation for what|-and-|do can be found here.
– marmot
Nov 14 '18 at 15:25
You guys are amazing: this is precisely what I wanted.
– Uli Fahrenberg
Nov 14 '18 at 15:11
You guys are amazing: this is precisely what I wanted.
– Uli Fahrenberg
Nov 14 '18 at 15:11
+1: What is the
aux node for?– Dr. Manuel Kuehner
Nov 14 '18 at 15:19
+1: What is the
aux node for?– Dr. Manuel Kuehner
Nov 14 '18 at 15:19
1
1
@Dr.ManuelKuehner It is midway between a and b and placed solely for calculation.
– TeXnician
Nov 14 '18 at 15:19
@Dr.ManuelKuehner It is midway between a and b and placed solely for calculation.
– TeXnician
Nov 14 '18 at 15:19
1
1
@Dr.ManuelKuehner This is a trick to find out (what TikZ thinks is) the middle between the two nodes, which then will determine the horizontal position of the arrow.
– marmot
Nov 14 '18 at 15:20
@Dr.ManuelKuehner This is a trick to find out (what TikZ thinks is) the middle between the two nodes, which then will determine the horizontal position of the arrow.
– marmot
Nov 14 '18 at 15:20
2
2
@Dr.ManuelKuehner I guess the best explanation for what
|- and -| do can be found here.– marmot
Nov 14 '18 at 15:25
@Dr.ManuelKuehner I guess the best explanation for what
|- and -| do can be found here.– marmot
Nov 14 '18 at 15:25
|
show 2 more comments
6
You can specify the horizontal and vertical position in terms of nodes.
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
draw[->] (b|-a.south) -- (b);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:38
TeXnicianTeXnician
25.1k63389
Nice (+1)... I think that the OP woyld like to useanchor=easttoo in order to not calculating manually the horizontal alignment. So,documentclass[tikz]standalone begindocument tikzsetmynode/.style=rectangle,draw,anchor=east begintikzpicture node[mynode] (a) at (0,0) Some rather long text; node[mynode] (b) at (0,-2) Even more text; draw[->] (b|-a.south) -- (b); endtikzpicture enddocumentwould be an easier way.
– koleygr
Nov 14 '18 at 14:58
add a comment |
6
You can specify the horizontal and vertical position in terms of nodes.
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
draw[->] (b|-a.south) -- (b);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:38
TeXnicianTeXnician
25.1k63389
Nice (+1)... I think that the OP woyld like to useanchor=easttoo in order to not calculating manually the horizontal alignment. So,documentclass[tikz]standalone begindocument tikzsetmynode/.style=rectangle,draw,anchor=east begintikzpicture node[mynode] (a) at (0,0) Some rather long text; node[mynode] (b) at (0,-2) Even more text; draw[->] (b|-a.south) -- (b); endtikzpicture enddocumentwould be an easier way.
– koleygr
Nov 14 '18 at 14:58
add a comment |
6
6
6
You can specify the horizontal and vertical position in terms of nodes.
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
draw[->] (b|-a.south) -- (b);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:38
TeXnicianTeXnician
25.1k63389
You can specify the horizontal and vertical position in terms of nodes.
documentclass[tikz]standalone
begindocument
begintikzpicture
node[rectangle, draw] (a) at (0,0) Some rather long text;
node[rectangle, draw] (b) at (.5,-2) Even more text;
draw[->] (b|-a.south) -- (b);
endtikzpicture
enddocument
answered Nov 14 '18 at 14:38
TeXnicianTeXnician
25.1k63389
answered Nov 14 '18 at 14:38
TeXnicianTeXnician
25.1k63389
answered Nov 14 '18 at 14:38
TeXnicianTeXnician
25.1k63389
answered Nov 14 '18 at 14:38
TeXnicianTeXnician
25.1k63389
25.1k63389
Nice (+1)... I think that the OP woyld like to useanchor=easttoo in order to not calculating manually the horizontal alignment. So,documentclass[tikz]standalone begindocument tikzsetmynode/.style=rectangle,draw,anchor=east begintikzpicture node[mynode] (a) at (0,0) Some rather long text; node[mynode] (b) at (0,-2) Even more text; draw[->] (b|-a.south) -- (b); endtikzpicture enddocumentwould be an easier way.
– koleygr
Nov 14 '18 at 14:58
add a comment |
Nice (+1)... I think that the OP woyld like to useanchor=easttoo in order to not calculating manually the horizontal alignment. So,documentclass[tikz]standalone begindocument tikzsetmynode/.style=rectangle,draw,anchor=east begintikzpicture node[mynode] (a) at (0,0) Some rather long text; node[mynode] (b) at (0,-2) Even more text; draw[->] (b|-a.south) -- (b); endtikzpicture enddocumentwould be an easier way.
– koleygr
Nov 14 '18 at 14:58
Nice (+1)... I think that the OP woyld like to use
anchor=east too in order to not calculating manually the horizontal alignment. So, documentclass[tikz]standalone begindocument tikzsetmynode/.style=rectangle,draw,anchor=east begintikzpicture node[mynode] (a) at (0,0) Some rather long text; node[mynode] (b) at (0,-2) Even more text; draw[->] (b|-a.south) -- (b); endtikzpicture enddocument would be an easier way.– koleygr
Nov 14 '18 at 14:58
Nice (+1)... I think that the OP woyld like to use
anchor=east too in order to not calculating manually the horizontal alignment. So, documentclass[tikz]standalone begindocument tikzsetmynode/.style=rectangle,draw,anchor=east begintikzpicture node[mynode] (a) at (0,0) Some rather long text; node[mynode] (b) at (0,-2) Even more text; draw[->] (b|-a.south) -- (b); endtikzpicture enddocument would be an easier way.– koleygr
Nov 14 '18 at 14:58
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f459954%2fprecise-placement-of-arrow-anchors%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
